Flap Barrier Gate
Integrating mechanism. electronics and micro-processor advanced technologies.The flap barrier is a improvement of intelligent tripod turnstiles.
Picture
Description
Integrating mechanism. electronics and micro-processor advanced technologies.The flap barrier is a improvement of intelligent tripod turnstiles. Equip various card-reading machines with hi-performance security protection SW to realize real-time warning and clever LED counter display guide passers. It balance pedestrian intelligent control and management.
Flap turnstile designs with tailored stainless steel make its elegance-looking.durable and anti-oxidation. Considering unique requests. We built-in standard electrical interface to best-fit customer easier using magnetic card.barcode. ID&IC cards integrated. This system provides civilized. Well-organized pass management and meantime its prohibit illegal persons entry&out.
Main Futures of Flap Turnstile
1. Gate machine communication: TCP/ IP. free signal line;
2. Multiple groups of electrical eye sensor real-time monitoring of channel status. accurate logic to judge. without hindrance authorized access;
3. Mechanical devices. the door position. current detection and channel sensors. and other four-channel protection pedestrian protection security folder;
4. The entire system is run using stepless positioning device. the operation of the sensor control. no mechanical collision
5. With automatic reset function. pedestrians read the effective card. if not within the prescribed time pass. the system will automatically cancel the user permissions for this pass;
6. Anti-tail function: Level 2 prevention
7. Access mode: one-way. two-way variety of work modes to choose from. adjustable speed;
8. Light prompts: traffic direction instructions;
9. With lightning protection against leakage function;
10. Protection: with anti-folder. crash. anti-blocking. anti-stall. anti-over-current over-current function;
11. To prevent illegal operation and alarm functions;
12. The standard external electrical interface. with photoelectric safety isolation. with a variety of control equipment connected to facilitate system integration remote control and setting functions;
Advantage
1. It has a clear and definite indicating function for the passenger. and it is displayed directly and visually on LED with passing or barring indication for passenger.
2. The entire system runs smoothly. with a low noise and free of mechanical impact.
3. Control of the tripod is achieved usually by an electro-mechanism mounted within the top section of the flap barrier and accessible by open the top cover. Only mechanical control is also available.
4. It has failure self-detect and alarm indication function. facilitating maintenance and application for the users.
5. A positive action lock/anti-tailgating function which prevents two passages at one time.
6. The flap barrier is provided with a standard electric interface and is easily integrated into a system with write/read facilities such as magnetic card. bar code card. ID card. IC card or biometric device.
7. Two or one direction can be controlled by switch-button and access controller.
8. It is provided with multiple operation modes for selection. It can either read card in double way for flow limit. or reading card in a way while barring in the other. or read card in a way while free passage in the other. Moreover. the operation mode of flap barrier may be set up with the software.
9. The mechanism is locked until a valid open signal is received.
10. The wing of the flap barrier can drop down automatically when the power is off. When the power is on again. the arms can also close automatically. Fail-safe or fail-lock functions: The mechanism will lock/ unlock the flap barrier flap in one or both directions in case of power failure.
Technical Parameters
Material |
Stainless Steel 304, Thickness 1.5mm |
Dimension |
1,400*300*1000mm (L*W*H) |
Bar length |
450mm |
Open or close time |
Within 1 seconds |
Passage Direction |
Single or Bi-directional |
IP |
IP54 |
Flow of passage |
50 passages per minute |
Motor |
DC Brushless motor (24v) |
Emergency mode |
Free egress when fire signal triggered |
Power supply |
AC220±10% V,50HZ |
Control voltage |
DC24V |
Power consumption |
30W (single) 60W (dual wing) |
Working temperature |
-45℃—— 70℃ |
Operating humidity range |
≤90% non-condensing |
Lifetime |
5--8 Million (Continuous Opening and Closing Operation) |
Self-resetting when failure |
10 seconds |
ODM/OEM service |
Available |
Usage |
Indoor or Outdoor with shelter |
Gross weight |
65kg/compact carton packing |
Warranty |
One Year |
Operation Place |
Subway Station, Hoverport, Tourism Sports, Exhibition, Swimming Hall, Residence Area, Enterprises Entrance and Exit Attendance, Gateway Guard, Charge Management, Special Access Control |
Package