Car Parking Sensor System

Car parking sensor system

Details:

Product number: Ultrasonic sensor 

Operating Voltage: DC 10~28V（24V） 

Detection accuracy >99.9% 

Power consumption: <1W 

Operating temperature: -20 ~ +65℃ 

Net weight: 180g  

Communication method: RS485 @9600bps 

Communicatio n distance: ≤150m（RVSP2*0.5） 

Installation height: Vertical 2 ~ 4m (recommended 2.5m) 

Housing material: Gray ABS project* 

Installation location: The probe is installed in the center of the parking space, and the indicator light is installed in front of the parking space. 

Standard sizes: Φ110mm*60mm

The split parking indicator is installed above the parking line. The horizontal distance from the parking line is 0 ~ 1 m, recommended 0.3 ~ 0.5 m; the installation height is between 2 and 3 meters, the recommended installation height is 2.5 meters

Set the remote control 

Set the remote control as a substitute for the generation of the DIP switch, and set the probe distance remotely. The traditional DIP switch needs to be up and down the ladder to debug the probe during debugging. The remote remote setting can be set by holding the remote control under the probe. Instructions: 1. Initialization is completed after about 1 second after power-on, and the above data is displayed on the screen. 2. Press the read key to read the current device value (this step can be skipped) 3. Use the up, down, left, and right to select the parameter to be modified, and press Add or Decrease to the desired value. 4. After modifying, press the setup button to complete the modification. If the device receives the modification information and the modification is successful, it will flash blue.