Precautions for daily use and maintenance of barrier-free access gate:

1. It is strictly prohibited to plug in or pull out the ports to connect the socket.Live plug and pull can easily damage the control circuit.

2. Regularly check whether the door panel of the brake is damaged, and deal with it in time if there is any damage.

Precautions for daily use and maintenance of barrier-free access gate:

1. It is strictly prohibited to plug in or pull out the ports to connect the socket.Live plug and pull can easily damage the control circuit.

2. Regularly check whether the door panel of the brake is damaged, and deal with it in time if there is any damage.

3. When the barrier-free access gate is in the closed state, do not collide with the door panel, which will cause the door panel wear and damage to other accessories, affecting the service life.

4. When the main engine, auxiliary engine or case of barrier-free brake is opened for maintenance, the power supply connected to the machine must be turned off.

5. Regularly check whether the fixing screws between the brake door panel, motor and tumbler are loose. If so, tighten them in time.

6, barrier-free passage brake machine shell material is stainless steel or cold board spray, must often use gentle fabric to scrub the appearance, keep clean and clean, do not use hard items to scrub the appearance, so as to avoid scratches affect the appearance, it is recommended to wipe once a day.

7. After swipping the card, the barrier switch of barrier-free access is on and off at the same time. This problem is caused by the proximity switch on the other side that does not operate.

1) Whether the light behind the proximity switch is on when the proximity switch senses the tumbler.

2) When the light behind the switch is on, check whether the signal is output to the control panel.

3) How far is the close opening distance from the tumbler? The general standard is 0.1mm to 0.2mm.